IP67

horizontal

≥ 50,000 h

CRI 80

Neon Flex HS

Neon Flex HS creates a uniform line of light with no visible LED dots. The flat 10 × 18 mm cross-section design facilitates installation in profiles and on flat surfaces, while horizontal bending allows the light to be guided along curves with a radius starting from 8 cm.

COB LED strip 8 mm 24 V emitting a uniform line of light

IP67

horizontal

≥ 50,000 h

CRI 80

Neon Flex HS

Neon Flex HS creates a uniform line of light with no visible LED dots. The flat 10 × 18 mm cross-section design facilitates installation in profiles and on flat surfaces, while horizontal bending allows the light to be guided along curves with a radius starting from 8 cm.

COB LED strip 8 mm 24 V emitting a uniform line of light

IP67

horizontal

≥ 50,000 h

CRI 80

Neon Flex HS

Neon Flex HS creates a uniform line of light with no visible LED dots. The flat 10 × 18 mm cross-section design facilitates installation in profiles and on flat surfaces, while horizontal bending allows the light to be guided along curves with a radius starting from 8 cm.

COB LED strip 8 mm 24 V emitting a uniform line of light

IP67

horizontal

≥ 50,000 h

CRI 80

Neon Flex HS

Neon Flex HS creates a uniform line of light with no visible LED dots. The flat 10 × 18 mm cross-section design facilitates installation in profiles and on flat surfaces, while horizontal bending allows the light to be guided along curves with a radius starting from 8 cm.

COB LED strip 8 mm 24 V emitting a uniform line of light

Configure Neon Flex HS

Select the light colour or colour temperature, mounting method, control system, and the components required to connect and terminate the Neon Flex. Once you submit your configuration, an advisor will verify the compatibility of the kit and contact you with a quotation.

Catalog sheet

Declaration of Conformity

Accessories

Begin configuration

Configure Neon Flex HS

Select the light colour or colour temperature, mounting method, control system, and the components required to connect and terminate the Neon Flex. Once you submit your configuration, an advisor will verify the compatibility of the kit and contact you with a quotation.

Catalog sheet

Declaration of Conformity

Accessories

Begin configuration

Configure Neon Flex HS

Select the light colour or colour temperature, mounting method, control system, and the components required to connect and terminate the Neon Flex. Once you submit your configuration, an advisor will verify the compatibility of the kit and contact you with a quotation.

Catalog sheet

Declaration of Conformity

Accessories

Begin configuration

Configure Neon Flex HS

Select the light colour or colour temperature, mounting method, control system, and the components required to connect and terminate the Neon Flex. Once you submit your configuration, an advisor will verify the compatibility of the kit and contact you with a quotation.

Catalog sheet

Declaration of Conformity

Accessories

Begin configuration

Neon Flex HS with a flat surface for profiles and surface mounting

HS combines a cross-section of 10 × 18 mm with a uniform line of light, horizontal bending and seven light distribution options. It can be installed in profiles or on flat surfaces, both indoors and outdoors.

Surface

Bends

Variants

Flat design for profiles and even surfaces

The 10 × 18 mm cross-section and flat shape facilitate the installation of HS in straight profiles and on even surfaces. The uniform luminous surface allows for the creation of distinct lines used in architectural, decorative, and advertising lighting.

Neon Flex HS with a flat surface for profiles and surface mounting

HS combines a cross-section of 10 × 18 mm with a uniform line of light, horizontal bending and seven light distribution options. It can be installed in profiles or on flat surfaces, both indoors and outdoors.

Surface

Bends

Variants

Flat design for profiles and even surfaces

The 10 × 18 mm cross-section and flat shape facilitate the installation of HS in straight profiles and on even surfaces. The uniform luminous surface allows for the creation of distinct lines used in architectural, decorative, and advertising lighting.

Neon Flex HS with a flat surface for profiles and surface mounting

HS combines a cross-section of 10 × 18 mm with a uniform line of light, horizontal bending and seven light distribution options. It can be installed in profiles or on flat surfaces, both indoors and outdoors.

Surface

Bends

Variants

Flat design for profiles and even surfaces

The 10 × 18 mm cross-section and flat shape facilitate the installation of HS in straight profiles and on even surfaces. The uniform luminous surface allows for the creation of distinct lines used in architectural, decorative, and advertising lighting.

Neon Flex HS with a flat surface for profiles and surface mounting

HS combines a cross-section of 10 × 18 mm with a uniform line of light, horizontal bending and seven light distribution options. It can be installed in profiles or on flat surfaces, both indoors and outdoors.

Surface

Bends

Variants

Flat design for profiles and even surfaces

The 10 × 18 mm cross-section and flat shape facilitate the installation of HS in straight profiles and on even surfaces. The uniform luminous surface allows for the creation of distinct lines used in architectural, decorative, and advertising lighting.

Configure a kit with Neon Flex HS

Select the appropriate light variant, mounting method, control system, and connection accessories. Once you submit your configuration, an advisor will verify component compatibility and contact you regarding the next steps.

1. Neon Flex

2. Installation

3. Control

4. Connection

5. Contact

Step 1. Choose the light temperature or colour

Select the variant to suit the function and character of the designed space. White colour temperatures are ideal for general and decorative lighting, while colour variants allow for the creation of distinctive light accents.

1. Neon Flex

2. Profile

3. Control

4. Accessories

5. Contact

1. Neon Flex

2. Installation

3. Control

4. Connection

5. Contact

Step 2. Choose the mounting method

Choose a solution tailored to the shape of your installation. The straight profile facilitates in-line mounting, the bent profile allows the Neon Flex to be routed along curves, and the mounting brackets are ideal for point mounting.

1. Neon Flex

2. Installation

3. Control

4. Connection

5. Contact

Step 3. Choose the control method

Select a controller if you want to adjust the brightness, colour, or illumination mode of your Neon Flex. We will only display solutions compatible with the selected product variant.

1. Neon Flex

2. Installation

3. Control

4. Connection

5. Contact

Step 4. Select the connection and end cap

Select the cable entry direction and the components required to connect and terminate the Neon Flex. Accessories will be matched to the selected product variant.

1. Neon Flex

2. Installation

3. Control

4. Connection

5. Contact

Step 5. Send the configuration for review

Please provide your contact details so we can verify the compatibility of the system, answer your questions, and prepare further information regarding your order.

Once submitted, we will review your configuration and contact you by phone. If necessary, we will propose compatible replacements or complementary components for the system.

The data controller is Bergmen Sp. z o.o. We process data for the purposes of order handling and contact (Article 6(1)(b) and (f) of GDPR). You have the right to access, rectify, restrict, and object. Details can be found in the GDPR policy and the General Terms and Conditions (OWS).

Configure a kit with Neon Flex HS

Select the appropriate light variant, mounting method, control system, and connection accessories. Once you submit your configuration, an advisor will verify component compatibility and contact you regarding the next steps.

1. Neon Flex

2. Installation

3. Control

4. Connection

5. Contact

Step 1. Choose the light temperature or colour

Select the variant to suit the function and character of the designed space. White colour temperatures are ideal for general and decorative lighting, while colour variants allow for the creation of distinctive light accents.

1. Neon Flex

2. Profile

3. Control

4. Accessories

5. Contact

1. Neon Flex

2. Installation

3. Control

4. Connection

5. Contact

Step 2. Choose the mounting method

Choose a solution tailored to the shape of your installation. The straight profile facilitates in-line mounting, the bent profile allows the Neon Flex to be routed along curves, and the mounting brackets are ideal for point mounting.

1. Neon Flex

2. Installation

3. Control

4. Connection

5. Contact

Step 3. Choose the control method

Select a controller if you want to adjust the brightness, colour, or illumination mode of your Neon Flex. We will only display solutions compatible with the selected product variant.

1. Neon Flex

2. Installation

3. Control

4. Connection

5. Contact

Step 4. Select the connection and end cap

Select the cable entry direction and the components required to connect and terminate the Neon Flex. Accessories will be matched to the selected product variant.

1. Neon Flex

2. Installation

3. Control

4. Connection

5. Contact

Step 5. Send the configuration for review

Please provide your contact details so we can verify the compatibility of the system, answer your questions, and prepare further information regarding your order.

Once submitted, we will review your configuration and contact you by phone. If necessary, we will propose compatible replacements or complementary components for the system.

The data controller is Bergmen Sp. z o.o. We process data for the purposes of order handling and contact (Article 6(1)(b) and (f) of GDPR). You have the right to access, rectify, restrict, and object. Details can be found in the GDPR policy and the General Terms and Conditions (OWS).

Configure a kit with Neon Flex HS

Select the appropriate light variant, mounting method, control system, and connection accessories. Once you submit your configuration, an advisor will verify component compatibility and contact you regarding the next steps.

1. Neon Flex

2. Installation

3. Control

4. Connection

5. Contact

Step 1. Choose the light temperature or colour

Select the variant to suit the function and character of the designed space. White colour temperatures are ideal for general and decorative lighting, while colour variants allow for the creation of distinctive light accents.

1. Neon Flex

2. Profile

3. Control

4. Accessories

5. Contact

1. Neon Flex

2. Installation

3. Control

4. Connection

5. Contact

Step 2. Choose the mounting method

Choose a solution tailored to the shape of your installation. The straight profile facilitates in-line mounting, the bent profile allows the Neon Flex to be routed along curves, and the mounting brackets are ideal for point mounting.

1. Neon Flex

2. Installation

3. Control

4. Connection

5. Contact

Step 3. Choose the control method

Select a controller if you want to adjust the brightness, colour, or illumination mode of your Neon Flex. We will only display solutions compatible with the selected product variant.

1. Neon Flex

2. Installation

3. Control

4. Connection

5. Contact

Step 4. Select the connection and end cap

Select the cable entry direction and the components required to connect and terminate the Neon Flex. Accessories will be matched to the selected product variant.

1. Neon Flex

2. Installation

3. Control

4. Connection

5. Contact

Step 5. Send the configuration for review

Please provide your contact details so we can verify the compatibility of the system, answer your questions, and prepare further information regarding your order.

Once submitted, we will review your configuration and contact you by phone. If necessary, we will propose compatible replacements or complementary components for the system.

The data controller is Bergmen Sp. z o.o. We process data for the purposes of order handling and contact (Article 6(1)(b) and (f) of GDPR). You have the right to access, rectify, restrict, and object. Details can be found in the GDPR policy and the General Terms and Conditions (OWS).

Frequently asked questions about Neon Flex HS

Discover detailed information regarding bending, cutting, mounting, powering, and controlling the MONO and RGB Neon Flex HS variants.

Installation and application

In which direction can the Neon Flex HS be bent?

How should the minimum bending radius of 8 cm be interpreted?

Where can the Neon Flex HS be cut?

Technology and lighting effect

What luminous flux do the white HS variants have?

Why is the luminous flux or CRI not specified for the colour and RGB variants?

Is the IP67 rating maintained after the product is cut?

Power supply and control

What power supply does HS require?

Does every HS variant work with the same controller?

Under what conditions can the Neon Flex HS operate?

Frequently asked questions about Neon Flex HS

Discover detailed information regarding bending, cutting, mounting, powering, and controlling the MONO and RGB Neon Flex HS variants.

Installation and application

In which direction can the Neon Flex HS be bent?

How should the minimum bending radius of 8 cm be interpreted?

Where can the Neon Flex HS be cut?

Technology and lighting effect

What luminous flux do the white HS variants have?

Why is the luminous flux or CRI not specified for the colour and RGB variants?

Is the IP67 rating maintained after the product is cut?

Power supply and control

What power supply does HS require?

Does every HS variant work with the same controller?

Under what conditions can the Neon Flex HS operate?

Frequently asked questions about Neon Flex HS

Discover detailed information regarding bending, cutting, mounting, powering, and controlling the MONO and RGB Neon Flex HS variants.

Installation and application

In which direction can the Neon Flex HS be bent?

How should the minimum bending radius of 8 cm be interpreted?

Where can the Neon Flex HS be cut?

Technology and lighting effect

What luminous flux do the white HS variants have?

Why is the luminous flux or CRI not specified for the colour and RGB variants?

Is the IP67 rating maintained after the product is cut?

Power supply and control

What power supply does HS require?

Does every HS variant work with the same controller?

Under what conditions can the Neon Flex HS operate?

Frequently asked questions about Neon Flex HS

Discover detailed information regarding bending, cutting, mounting, powering, and controlling the MONO and RGB Neon Flex HS variants.

Installation and application

In which direction can the Neon Flex HS be bent?

How should the minimum bending radius of 8 cm be interpreted?

Where can the Neon Flex HS be cut?

Technology and lighting effect

What luminous flux do the white HS variants have?

Why is the luminous flux or CRI not specified for the colour and RGB variants?

Is the IP67 rating maintained after the product is cut?

Power supply and control

What power supply does HS require?

Does every HS variant work with the same controller?

Under what conditions can the Neon Flex HS operate?

Products for Neon Flex Liner‑H

Complete your Neon Flex installation with the appropriate power supply and control system, or explore LED strips for other linear lighting applications.

Aluminium profile with diffuser for LED strip installation

LED strips

Flexible light sources for profiles, furniture, recesses and architectural details. Available in a wide range of widths, power outputs and colour temperatures.

See LED strips

LED power supplies

24 V LED power supplies, designed for installation with LED strips, modules and other LED light sources.

See power supplies

LED control

Controllers and accessories for convenient management of LED lighting, including brightness control and operation of MONO installations.

See control systems

Products for Neon Flex Liner‑H

Complete your Neon Flex installation with the appropriate power supply and control system, or explore LED strips for other linear lighting applications.

Aluminium profile with diffuser for LED strip installation

LED strips

Flexible light sources for profiles, furniture, recesses and architectural details. Available in a wide range of widths, power outputs and colour temperatures.

See LED strips

LED power supplies

24 V LED power supplies, designed for installation with LED strips, modules and other LED light sources.

See power supplies

LED control

Controllers and accessories for convenient management of LED lighting, including brightness control and operation of MONO installations.

See control systems

Products for Neon Flex Liner‑H

Complete your Neon Flex installation with the appropriate power supply and control system, or explore LED strips for other linear lighting applications.

Aluminium profile with diffuser for LED strip installation

LED strips

Flexible light sources for profiles, furniture, recesses and architectural details. Available in a wide range of widths, power outputs and colour temperatures.

See LED strips

LED power supplies

24 V LED power supplies, designed for installation with LED strips, modules and other LED light sources.

See power supplies

LED control

Controllers and accessories for convenient management of LED lighting, including brightness control and operation of MONO installations.

See control systems

Products for Neon Flex Liner‑H

Complete your Neon Flex installation with the appropriate power supply and control system, or explore LED strips for other linear lighting applications.

Aluminium profile with diffuser for LED strip installation

LED strips

Flexible light sources for profiles, furniture, recesses and architectural details. Available in a wide range of widths, power outputs and colour temperatures.

See LED strips

LED power supplies

24 V LED power supplies, designed for installation with LED strips, modules and other LED light sources.

See power supplies

LED control

Controllers and accessories for convenient management of LED lighting, including brightness control and operation of MONO installations.

See control systems

Do you have a greater challenge?

Our experts are at your disposal

Individual support

Let's discuss your lighting project

If your needs exceed the standard Neon Flex configuration, describe your project - we will help select the optimal solution.

The administrator of your personal data is BERGMEN Sp. z o.o. based at rtm. Witold Pilecki Street 4, 32-050 Skawina. By filling out this form, you consent to being contacted for query handling and receiving commercial information electronically.

Bergmen Sp. z o.o.

Address: ul. rtm. Witolda Pileckiego 4

32-050 Skawina

Poland

Customer service department

Commercial offers, orders, advice on product selection.

Direct contact:

  • Phone: +48 668 372 698

  • E-mail: export@bergmen.pl

Contact

Phone: 12 415 50 50

E-mail: kontakt@bergmen.pl

Do you have a greater challenge?

Our experts are at your disposal

Individual support

Let's discuss your lighting project

If your needs exceed the standard Neon Flex configuration, describe your project - we will help select the optimal solution.

The administrator of your personal data is BERGMEN Sp. z o.o. based at rtm. Witold Pilecki Street 4, 32-050 Skawina. By filling out this form, you consent to being contacted for query handling and receiving commercial information electronically.

Bergmen Sp. z o.o.

Address: ul. rtm. Witolda Pileckiego 4

32-050 Skawina

Poland

Customer service department

Commercial offers, orders, advice on product selection.

Direct contact:

  • Phone: +48 668 372 698

  • E-mail: export@bergmen.pl

Contact

Phone: 12 415 50 50

E-mail: kontakt@bergmen.pl

Do you have a greater challenge?

Our experts are at your disposal

Individual support

Let's discuss your lighting project

If your needs exceed the standard Neon Flex configuration, describe your project - we will help select the optimal solution.

The administrator of your personal data is BERGMEN Sp. z o.o. based at rtm. Witold Pilecki Street 4, 32-050 Skawina. By filling out this form, you consent to being contacted for query handling and receiving commercial information electronically.

Bergmen Sp. z o.o.

Address: ul. rtm. Witolda Pileckiego 4

32-050 Skawina

Poland

Customer service department

Commercial offers, orders, advice on product selection.

Direct contact:

  • Phone: +48 668 372 698

  • E-mail: export@bergmen.pl

Contact

Phone: 12 415 50 50

E-mail: kontakt@bergmen.pl

Do you have a greater challenge?

Our experts are at your disposal

Individual support

Let's discuss your lighting project

If your needs exceed the standard Neon Flex configuration, describe your project - we will help select the optimal solution.

The administrator of your personal data is BERGMEN Sp. z o.o. based at rtm. Witold Pilecki Street 4, 32-050 Skawina. By filling out this form, you consent to being contacted for query handling and receiving commercial information electronically.

Bergmen Sp. z o.o.

Address: ul. rtm. Witolda Pileckiego 4

32-050 Skawina

Poland

Customer service department

Commercial offers, orders, advice on product selection.

Direct contact:

  • Phone: +48 668 372 698

  • E-mail: export@bergmen.pl

Contact

Phone: 12 415 50 50

E-mail: kontakt@bergmen.pl