
LED strips Therm
24 V LED strip in warm white 3000 K with IP67 rating. Therm 160: 6 W/m, 10 mm width, and cut points every 2.5 cm.
PRODUCT FAMILY
Bergmen Therm 160 features a power consumption of 6 W/m and a luminous flux of 750 lm/m in 3000 K warm white. It combines a 10 mm width with an IP67 rating and a cutting unit of 2.5 cm. It operates at 24 V with a CRI of 80. Selection for high-temperature environments requires verified operating conditions; the IP67 rating alone does not determine thermal resistance.
Image 1 of 3
APPLICATIONS / LIGHTING IN DESIGN
The following applications refer to warm backlighting under conditions within the confirmed product specification.
3000 K gives the structure a warm character. A luminous flux of 750 lm/m is primarily suited to accent lighting.
The strip's protective ingress rating can form part of a properly sealed installation. Selection also encompasses end caps and ambient conditions.
The 2.5 cm cut section allows the strip length to be tailored to the detail dimensions more precisely than a 5 cm pitch.
PRODUCT DOCUMENTATION
This parameter specifies the level of ingress protection against dust and water under defined test conditions. It does not indicate the permissible operating temperature, nor does it automatically confirm suitability for high-temperature environments.
No. Such a selection requires a verified operating temperature range for the product, as well as specific installation conditions for the entire system. It cannot be deduced from the product name or the IP rating.
The Therm 160 delivers a constant warm white of 3000 K and 750 lm/m at 6 W/m. This provides a moderate luminous flux for local accent lighting; it is neither a tunable white nor an RGB tape.
01 / SELECT VARIANT
Compare parameters and add the selected variants to your enquiry.
Product code: 01-002-084-02-20
02 / COMPLETE THE SOLUTION
Add power supply units, controls, and accessories to a single list. We will help you select the right variants for your installation.
POWER SUPPLY / 01IP67A compact series of LED drivers. 12 and 24 V DC versions; power ratings from 40 to 200 W.
POWER SUPPLY / 02IP67A slim series of LED power supplies. 12 and 24 V DC versions; power outputs from 30 to 360 W.
We will select the appropriate voltage option and power supply rating to match your chosen LED strip, its length, and the installation requirements.
CONTROL / 01Single colour / CCTMONO/CCT controller, 12–24 V DC. Brightness control, and in CCT mode, colour temperature adjustment. 2.4 GHz RF. IP20.
CONTROL / 02RGB / RGBW / RGB+CCTRGB/RGBW/RGB+CCT controller, 12–24 V DC. Colour and brightness adjustment; colour temperature adjustment also available in RGB+CCT mode. RF 2.4 GHz. IP20.

Power connection

Wire connections

Wire connections
We will select the cable cross-section and connection method to match the load and installation layout.