
Taśmy LED Flex WP IC
12 V digital RGB strip with SK6813 protocol and IP65 protection. Flex WP IC for dynamic colours and sequences along a decorative line.
RODZINA PRODUKTÓW
Bergmen Flex WP IC enables dynamic effects across sequential segments of the LED strip. It features digital SK6813 control, distinct from the analogue Flex WP RGB. It is equipped with 60 LEDs/m (3535 type), an 8 mm width, and a power output of 6.48 W/m. The IP65 rating allows it to be specified in projects requiring strip protection, provided that the connections are properly sealed. It operates on a 12 V power supply with a cutting unit of 6 cm.
Zdjęcie 1 z 3
ZASTOSOWANIE / ŚWIATŁO W PROJEKCIE
Flex WP IC is suitable for decorative light motion, where sequential sections of the line respond according to the controller program.
Digital segments allow for the creation of smooth transitions and running colour effects, going far beyond the simultaneous colour change of an entire RGB section.
Dynamic light effects can draw attention to a specific part of the arrangement. The colour palette and effect sequence depend on a compatible controller and its program.
IP65 is suitable for projects that require a protective jacket for the strip. Control components and all connections require their own IP rating matched to the installation conditions.
DOKUMENTACJA PRODUKTU
This is a different control method. The IC enables segmented effects via SK6813, while analogue RGB controls the entire section together. They also differ in power and width.
A digital controller with verified SK6813 support is required. The RGB label alone or support for another digital protocol does not guarantee compatibility.
The cutting section specifies the permissible cutting point. The effect resolution and addressing method result from the tape design and compatible control system; they should not be deduced solely from the cutting pitch.
01 / WYBIERZ WARIANT
Porównaj parametry i dodaj wybrane warianty do zapytania.
Kod produktu: 01-002-092-08-65-01
02 / UZUPEŁNIJ ROZWIĄZANIE
Dodaj zasilanie, sterowanie i akcesoria do jednej listy. Pomożemy dobrać warianty do Twojej instalacji.
ZASILANIE / 01IP67A compact series of LED drivers. 12 and 24 V DC versions; power ratings from 40 to 200 W.
ZASILANIE / 02IP67A slim series of LED power supplies. 12 and 24 V DC versions; power outputs from 30 to 360 W.
Wariant napięcia i moc zasilacza dobierzemy do wybranej taśmy, jej długości i warunków instalacji.
STEROWANIE / 01Single colour / CCTMONO/CCT controller, 12–24 V DC. Brightness control, and in CCT mode, colour temperature adjustment. 2.4 GHz RF. IP20.
STEROWANIE / 02RGB / RGBW / RGB+CCTRGB/RGBW/RGB+CCT controller, 12–24 V DC. Colour and brightness adjustment; colour temperature adjustment also available in RGB+CCT mode. RF 2.4 GHz. IP20.

Połączenie zasilania

Połączenia przewodów

Połączenia przewodów
Przekrój przewodu i sposób połączenia dobierzemy do obciążenia oraz układu instalacji.