12 / 24 V DC

≥ 50,000 h

IP68

CRI 80

LED module RX‑3 Stark

RX-3 Stark is a three-diode LED module for backlighting letters, signage, and 3D advertising structures with a depth of 60-170 mm. A wide 160° beam angle, non-polarised technology in MONO variants, and an extensive range of colour temperatures facilitate the design of uniform indoor and outdoor installations.

Narrow LED strip Lestra 24 V with a width of 4 or 5 mm

12 / 24 V DC

≥ 50,000 h

IP68

CRI 80

LED module RX‑3 Stark

RX-3 Stark is a three-diode LED module for backlighting letters, signage, and 3D advertising structures with a depth of 60-170 mm. A wide 160° beam angle, non-polarised technology in MONO variants, and an extensive range of colour temperatures facilitate the design of uniform indoor and outdoor installations.

Narrow LED strip Lestra 24 V with a width of 4 or 5 mm

12 / 24 V DC

≥ 50,000 h

IP68

CRI 80

LED module RX‑3 Stark

RX-3 Stark is a three-diode LED module for backlighting letters, signage, and 3D advertising structures with a depth of 60-170 mm. A wide 160° beam angle, non-polarised technology in MONO variants, and an extensive range of colour temperatures facilitate the design of uniform indoor and outdoor installations.

Narrow LED strip Lestra 24 V with a width of 4 or 5 mm

12 / 24 V DC

≥ 50,000 h

IP68

CRI 80

LED module RX‑3 Stark

RX-3 Stark is a three-diode LED module for backlighting letters, signage, and 3D advertising structures with a depth of 60-170 mm. A wide 160° beam angle, non-polarised technology in MONO variants, and an extensive range of colour temperatures facilitate the design of uniform indoor and outdoor installations.

Narrow LED strip Lestra 24 V with a width of 4 or 5 mm

Configure the system with the RX-3 Stark module

Select the voltage, colour temperature, and power of the module, then choose the power supply, control system, and required accessories. Once you submit the configuration, an adviser will verify the compatibility of the components, circuit load, and design specifications.

Catalog sheet

Declaration of Conformity

Begin configuration

Configure the system with the RX-3 Stark module

Select the voltage, colour temperature, and power of the module, then choose the power supply, control system, and required accessories. Once you submit the configuration, an adviser will verify the compatibility of the components, circuit load, and design specifications.

Catalog sheet

Declaration of Conformity

Begin configuration

Configure the system with the RX-3 Stark module

Select the voltage, colour temperature, and power of the module, then choose the power supply, control system, and required accessories. Once you submit the configuration, an adviser will verify the compatibility of the components, circuit load, and design specifications.

Catalog sheet

Declaration of Conformity

Begin configuration

Configure the system with the RX-3 Stark module

Select the voltage, colour temperature, and power of the module, then choose the power supply, control system, and required accessories. Once you submit the configuration, an adviser will verify the compatibility of the components, circuit load, and design specifications.

Catalog sheet

Declaration of Conformity

Begin configuration

RX-3 Stark LED module for advertising letters and signs

RX-3 Stark combines three LEDs with wide 160° optics and a compact housing measuring 68 × 15 × 8.1 mm. The family includes white, single-colour, and RGB variants, designed for illuminating advertising structures of various depths.

Depth

Optics

Variants

For applications with a depth of 60-170 mm

An application depth of 60-170 mm makes RX‑3 Stark suitable for use in channel letters, lightboxes, and signage. The final module spacing should be verified with the actual face material, as uniformity is also affected by its light transmission, colour, sign geometry, and internal finish.

RX-3 Stark LED module for advertising letters and signs

RX-3 Stark combines three LEDs with wide 160° optics and a compact housing measuring 68 × 15 × 8.1 mm. The family includes white, single-colour, and RGB variants, designed for illuminating advertising structures of various depths.

Depth

Optics

Variants

For applications with a depth of 60-170 mm

An application depth of 60-170 mm makes RX‑3 Stark suitable for use in channel letters, lightboxes, and signage. The final module spacing should be verified with the actual face material, as uniformity is also affected by its light transmission, colour, sign geometry, and internal finish.

RX-3 Stark LED module for advertising letters and signs

RX-3 Stark combines three LEDs with wide 160° optics and a compact housing measuring 68 × 15 × 8.1 mm. The family includes white, single-colour, and RGB variants, designed for illuminating advertising structures of various depths.

Depth

Optics

Variants

For applications with a depth of 60-170 mm

An application depth of 60-170 mm makes RX‑3 Stark suitable for use in channel letters, lightboxes, and signage. The final module spacing should be verified with the actual face material, as uniformity is also affected by its light transmission, colour, sign geometry, and internal finish.

RX-3 Stark LED module for advertising letters and signs

RX-3 Stark combines three LEDs with wide 160° optics and a compact housing measuring 68 × 15 × 8.1 mm. The family includes white, single-colour, and RGB variants, designed for illuminating advertising structures of various depths.

Depth

Optics

Variants

For applications with a depth of 60-170 mm

An application depth of 60-170 mm makes RX‑3 Stark suitable for use in channel letters, lightboxes, and signage. The final module spacing should be verified with the actual face material, as uniformity is also affected by its light transmission, colour, sign geometry, and internal finish.

Configure a kit with the RX‑3 Stark module

Select the module variant, power supply, and control method, then complete the kit with the required accessories. Once the configuration is submitted, an adviser will verify voltage compatibility, power supply wattage, and the maximum number of modules in a chain.

1. Colour temperature

2. Power supply

3. Control

4. Accessories

5. Contact

Step 1. Choose the colour temperature of the light

Select the module variant to match the desired lighting effect and the character of the illuminated surface.

1. Colour temperature

2. Power supply

3. Control

4. Accessories

5. Contact

1. Colour temperature

2. Power supply

3. Control

4. Accessories

5. Contact

Step 2. Select the power supply method

The power supply is selected based on the number of modules, the control method, and the system parameters. Please choose whether we should include it in the prepared kit.

1. Colour temperature

2. Power supply

3. Control

4. Accessories

5. Contact

Step 3. Choose the control method

Select a controller compatible with the module and the planned method of operating the installation. If the system does not require additional control, you can skip this step.

1. Colour temperature

2. Power supply

3. Control

4. Accessories

5. Contact

Step 4. Select mounting accessories

Select the cables and connectors needed to power and connect the installation components. Once you submit your configuration, an advisor will verify their compatibility with the selected set.

1. Colour temperature

2. Power supply

3. Control

4. Accessories

5. Contact

Step 5. Send the configuration for review

Please provide your contact details so we can verify the compatibility of the system, answer your questions, and prepare further information regarding your order.

Once submitted, we will review your configuration and contact you by phone. If necessary, we will propose compatible replacements or complementary components for the system.

The data controller is Bergmen Sp. z o.o. We process data for the purposes of order handling and contact (Article 6(1)(b) and (f) of GDPR). You have the right to access, rectify, restrict, and object. Details can be found in the GDPR policy and the General Terms and Conditions (OWS).

Configure a kit with the RX‑3 Stark module

Select the module variant, power supply, and control method, then complete the kit with the required accessories. Once the configuration is submitted, an adviser will verify voltage compatibility, power supply wattage, and the maximum number of modules in a chain.

1. Colour temperature

2. Power supply

3. Control

4. Accessories

5. Contact

Step 1. Choose the colour temperature of the light

Select the module variant to match the desired lighting effect and the character of the illuminated surface.

1. Colour temperature

2. Power supply

3. Control

4. Accessories

5. Contact

1. Colour temperature

2. Power supply

3. Control

4. Accessories

5. Contact

Step 2. Select the power supply method

The power supply is selected based on the number of modules, the control method, and the system parameters. Please choose whether we should include it in the prepared kit.

1. Colour temperature

2. Power supply

3. Control

4. Accessories

5. Contact

Step 3. Choose the control method

Select a controller compatible with the module and the planned method of operating the installation. If the system does not require additional control, you can skip this step.

1. Colour temperature

2. Power supply

3. Control

4. Accessories

5. Contact

Step 4. Select mounting accessories

Select the cables and connectors needed to power and connect the installation components. Once you submit your configuration, an advisor will verify their compatibility with the selected set.

1. Colour temperature

2. Power supply

3. Control

4. Accessories

5. Contact

Step 5. Send the configuration for review

Please provide your contact details so we can verify the compatibility of the system, answer your questions, and prepare further information regarding your order.

Once submitted, we will review your configuration and contact you by phone. If necessary, we will propose compatible replacements or complementary components for the system.

The data controller is Bergmen Sp. z o.o. We process data for the purposes of order handling and contact (Article 6(1)(b) and (f) of GDPR). You have the right to access, rectify, restrict, and object. Details can be found in the GDPR policy and the General Terms and Conditions (OWS).

Configure a kit with the RX‑3 Stark module

Select the module variant, power supply, and control method, then complete the kit with the required accessories. Once the configuration is submitted, an adviser will verify voltage compatibility, power supply wattage, and the maximum number of modules in a chain.

1. Colour temperature

2. Power supply

3. Control

4. Accessories

5. Contact

Step 1. Choose the colour temperature of the light

Select the module variant to match the desired lighting effect and the character of the illuminated surface.

1. Colour temperature

2. Power supply

3. Control

4. Accessories

5. Contact

1. Colour temperature

2. Power supply

3. Control

4. Accessories

5. Contact

Step 2. Select the power supply method

The power supply is selected based on the number of modules, the control method, and the system parameters. Please choose whether we should include it in the prepared kit.

1. Colour temperature

2. Power supply

3. Control

4. Accessories

5. Contact

Step 3. Choose the control method

Select a controller compatible with the module and the planned method of operating the installation. If the system does not require additional control, you can skip this step.

1. Colour temperature

2. Power supply

3. Control

4. Accessories

5. Contact

Step 4. Select mounting accessories

Select the cables and connectors needed to power and connect the installation components. Once you submit your configuration, an advisor will verify their compatibility with the selected set.

1. Colour temperature

2. Power supply

3. Control

4. Accessories

5. Contact

Step 5. Send the configuration for review

Please provide your contact details so we can verify the compatibility of the system, answer your questions, and prepare further information regarding your order.

Once submitted, we will review your configuration and contact you by phone. If necessary, we will propose compatible replacements or complementary components for the system.

The data controller is Bergmen Sp. z o.o. We process data for the purposes of order handling and contact (Article 6(1)(b) and (f) of GDPR). You have the right to access, rectify, restrict, and object. Details can be found in the GDPR policy and the General Terms and Conditions (OWS).

Frequently asked questions about the RX-3 Stark LED module

Discover practical design principles for backlighting letters, signs, and lightboxes using RX-3 Stark modules.

Installation and application

Is the RX-3 Stark suitable for any application with a depth of 60-170 mm?

Can a 120 mm C-C spacing be used in any sign?

How does a 160° beam angle affect the design of a backlight system?

Technology and lighting effect

How do the luminous fluxes of the available variants differ?

What LED light sources are used in the individual versions?

Is an IP68 rating sufficient for outdoor advertising?

Power supply and control

How many modules can be connected in a single chain?

Which RX‑3 Stark variants require a 24 V power supply?

What does polarization-free technology mean?

Frequently asked questions about the RX-3 Stark LED module

Discover practical design principles for backlighting letters, signs, and lightboxes using RX-3 Stark modules.

Installation and application

Is the RX-3 Stark suitable for any application with a depth of 60-170 mm?

Can a 120 mm C-C spacing be used in any sign?

How does a 160° beam angle affect the design of a backlight system?

Technology and lighting effect

How do the luminous fluxes of the available variants differ?

What LED light sources are used in the individual versions?

Is an IP68 rating sufficient for outdoor advertising?

Power supply and control

How many modules can be connected in a single chain?

Which RX‑3 Stark variants require a 24 V power supply?

What does polarization-free technology mean?

Frequently asked questions about the RX-3 Stark LED module

Discover practical design principles for backlighting letters, signs, and lightboxes using RX-3 Stark modules.

Installation and application

Is the RX-3 Stark suitable for any application with a depth of 60-170 mm?

Can a 120 mm C-C spacing be used in any sign?

How does a 160° beam angle affect the design of a backlight system?

Technology and lighting effect

How do the luminous fluxes of the available variants differ?

What LED light sources are used in the individual versions?

Is an IP68 rating sufficient for outdoor advertising?

Power supply and control

How many modules can be connected in a single chain?

Which RX‑3 Stark variants require a 24 V power supply?

What does polarization-free technology mean?

Frequently asked questions about the RX-3 Stark LED module

Discover practical design principles for backlighting letters, signs, and lightboxes using RX-3 Stark modules.

Installation and application

Is the RX-3 Stark suitable for any application with a depth of 60-170 mm?

Can a 120 mm C-C spacing be used in any sign?

How does a 160° beam angle affect the design of a backlight system?

Technology and lighting effect

How do the luminous fluxes of the available variants differ?

What LED light sources are used in the individual versions?

Is an IP68 rating sufficient for outdoor advertising?

Power supply and control

How many modules can be connected in a single chain?

Which RX‑3 Stark variants require a 24 V power supply?

What does polarization-free technology mean?

Also worth checking

In addition to the LED module itself, you may require power supply and control components for a complete installation. If you are looking for a ready-made advertising solution, also check our system of LED-backlit lightboxes.

Aluminium profile with diffuser for LED strip installation

myFrame lightboxes

A ready-to-use system of ultra-thin LED lightboxes - a complete advertising solution instead of a standard module.

See myFrame

LED power supplies

Power supplies designed for installation with LED modules. Also select the appropriate voltage, power, and protection class for your specific installation.

See power supplies

LED control

Controllers and accessories for convenient operation and precise adjustment of installations with LED modules.

See control systems

Also worth checking

In addition to the LED module itself, you may require power supply and control components for a complete installation. If you are looking for a ready-made advertising solution, also check our system of LED-backlit lightboxes.

Aluminium profile with diffuser for LED strip installation

myFrame lightboxes

A ready-to-use system of ultra-thin LED lightboxes - a complete advertising solution instead of a standard module.

See myFrame

LED power supplies

Power supplies designed for installation with LED modules. Also select the appropriate voltage, power, and protection class for your specific installation.

See power supplies

LED control

Controllers and accessories for convenient operation and precise adjustment of installations with LED modules.

See control systems

Also worth checking

In addition to the LED module itself, you may require power supply and control components for a complete installation. If you are looking for a ready-made advertising solution, also check our system of LED-backlit lightboxes.

Aluminium profile with diffuser for LED strip installation

myFrame lightboxes

A ready-to-use system of ultra-thin LED lightboxes - a complete advertising solution instead of a standard module.

See myFrame

LED power supplies

Power supplies designed for installation with LED modules. Also select the appropriate voltage, power, and protection class for your specific installation.

See power supplies

LED control

Controllers and accessories for convenient operation and precise adjustment of installations with LED modules.

See control systems

Also worth checking

In addition to the LED module itself, you may require power supply and control components for a complete installation. If you are looking for a ready-made advertising solution, also check our system of LED-backlit lightboxes.

Aluminium profile with diffuser for LED strip installation

myFrame lightboxes

A ready-to-use system of ultra-thin LED lightboxes - a complete advertising solution instead of a standard module.

See myFrame

LED power supplies

Power supplies designed for installation with LED modules. Also select the appropriate voltage, power, and protection class for your specific installation.

See power supplies

LED control

Controllers and accessories for convenient operation and precise adjustment of installations with LED modules.

See control systems

Do you have a greater challenge?

Our experts are at your disposal

Individual support

Let's discuss your lighting project

If your needs exceed the standard Neon Flex configuration, describe your project - we will help select the optimal solution.

The administrator of your personal data is BERGMEN Sp. z o.o. based at rtm. Witold Pilecki Street 4, 32-050 Skawina. By filling out this form, you consent to being contacted for query handling and receiving commercial information electronically.

Bergmen Sp. z o.o.

Address: ul. rtm. Witolda Pileckiego 4

32-050 Skawina

Poland

Customer service department

Commercial offers, orders, advice on product selection.

Direct contact:

  • Phone: +48 668 372 698

  • E-mail: export@bergmen.pl

Contact

Phone: 12 415 50 50

E-mail: kontakt@bergmen.pl

Do you have a greater challenge?

Our experts are at your disposal

Individual support

Let's discuss your lighting project

If your needs exceed the standard Neon Flex configuration, describe your project - we will help select the optimal solution.

The administrator of your personal data is BERGMEN Sp. z o.o. based at rtm. Witold Pilecki Street 4, 32-050 Skawina. By filling out this form, you consent to being contacted for query handling and receiving commercial information electronically.

Bergmen Sp. z o.o.

Address: ul. rtm. Witolda Pileckiego 4

32-050 Skawina

Poland

Customer service department

Commercial offers, orders, advice on product selection.

Direct contact:

  • Phone: +48 668 372 698

  • E-mail: export@bergmen.pl

Contact

Phone: 12 415 50 50

E-mail: kontakt@bergmen.pl

Do you have a greater challenge?

Our experts are at your disposal

Individual support

Let's discuss your lighting project

If your needs exceed the standard Neon Flex configuration, describe your project - we will help select the optimal solution.

The administrator of your personal data is BERGMEN Sp. z o.o. based at rtm. Witold Pilecki Street 4, 32-050 Skawina. By filling out this form, you consent to being contacted for query handling and receiving commercial information electronically.

Bergmen Sp. z o.o.

Address: ul. rtm. Witolda Pileckiego 4

32-050 Skawina

Poland

Customer service department

Commercial offers, orders, advice on product selection.

Direct contact:

  • Phone: +48 668 372 698

  • E-mail: export@bergmen.pl

Contact

Phone: 12 415 50 50

E-mail: kontakt@bergmen.pl

Do you have a greater challenge?

Our experts are at your disposal

Individual support

Let's discuss your lighting project

If your needs exceed the standard Neon Flex configuration, describe your project - we will help select the optimal solution.

The administrator of your personal data is BERGMEN Sp. z o.o. based at rtm. Witold Pilecki Street 4, 32-050 Skawina. By filling out this form, you consent to being contacted for query handling and receiving commercial information electronically.

Bergmen Sp. z o.o.

Address: ul. rtm. Witolda Pileckiego 4

32-050 Skawina

Poland

Customer service department

Commercial offers, orders, advice on product selection.

Direct contact:

  • Phone: +48 668 372 698

  • E-mail: export@bergmen.pl

Contact

Phone: 12 415 50 50

E-mail: kontakt@bergmen.pl